EFL Snowman w/ Motor Arm
- This is a modification of the original snowman with the lighted waving arm. Instead this option uses an animation kit available from Mattos Designs
This is very much a DIY prop but is easily put together with parts and hardware easily found at your local Lowes or hardware store.
For this model the lower arm beneath the waving portion has been deleted and instead includes a more robust arm that attaches to the prop and the Mattos Motor.
Available with 10x25 matrix chosen in the options tab
This model requires the customer to cut a 2x4 to shape for the arm and motor mount using a drill and a saw of choice. There are existing holes in the prop for placement.
10mm white coro, cut in two pieces, slit and folded for shipping. Backer plates included
7ft tall around 42 in wide. Not a little guy
Vectors for vinyl cuts are included in the download of the xmodel zip folder
Materials Supplied by customer
MATTOS DESIGNS LLC FULL ANIMATION KIT W/4" EXTENSION
MATTOS DESIGNS PROP MOTOR CAM EXTENSION 8"
Wood Screws/ at least 4 screws, 1 to 1 1/2" long. Number 6 or 8 size
2x4 at least 7" long,
3= 5/16x1" bolt
6= 5/16 flat washer
6= 1/4 flat washer
3= 5/16 nylon lock nut
3=1/4 nylon lock nut
2= m6x1.0 screw 1/2 to 3/4 long. With locks washers for the motor Recommended HILLMAN FLAT washer, Nylon 1-1/8 x .54 x 1/8
Hillman 1/4-in I.D. x 1/2-in O.D. x 1/2-in Long Natural Nylon Spacers for the arm pivot
- Ships in a 48x24 box 4 layers